Yamaha RX-Z11 Betriebsanweisung

Press 9n to select “EDIT” and press 9

ENTER to 

access the edit window.
For more information on the parametric equalizer and each 
parameter, see page 160.

The parameter selected in “PARAM” is highlighted.
• Press 9l / h to adjust the parameter.
• Press 9k / n to adjust the “Gain”.
• Press 9ENTER to exit the edit window.

y
• When you select “Band” in step 3, you can use this menu as a graphic 

equalizer.

• “Band #4”, “Band #5”, “Band #6”, and “Band #7” can adjust the 

frequencies above of 500 Hz.

• When you select “Subwoofer L” or “Subwoofer R” in step 1 and 

“Band” in step 3, you can adjust “Band #1”, “Band #2”, and “Band 
#3” only. In this case, “Band #1”, “Band #2”, and “Band #3” can 
adjust the frequencies below of 250 Hz.

y
If you want to reset all “Parametric EQ” parameter settings for the 
selected speaker, select “RESET” and press 9ENTER.

Select “EXIT” and press 9

ENTER to exit from the 

■ Tone Control (Tone control)

Use this feature to adjust the balance of bass and treble output to 
your speakers or headphones.

Tone Control is not effective when:

– the Pure Direct mode (see page 65) is selected.
– one of the THX Surround mode is selected (see page 87).
– MULTI CH is selected as the input source.

Control (Tone control)

y
“Speaker” and “Headphone” adjustments are stored independently. The 
adjustments for “Speaker” affects the front left/right, center, presence left/
right speaker channels and Subwoofer channel.

Bass (Bass control)
Use this feature to adjust low-frequencies output to your speakers or 
headphones.
Choices: 125 Hz, 350 Hz, 500 Hz
Control range: – 6.0 dB to +6.0 dB
Initial setting: 0.0 dB

Treble (Treble control)
Use this feature to adjust high-frequencies output to your speakers 
or headphones.
Choices: 2.5 kHz, 3.5 kHz, 8.0 kHz
Control range: – 6.0 dB to +6.0 dB
Initial setting: 0.0 dB

Auto Bypass (Auto bypass)
Use this feature to select whether the audio output bypasses the tone 
control circuitry when “Treble” and “Bass” are set to 0 dB (see 
page 65).

■ Lipsync 

Use this feature to adjust the audio and video synchronization.

HDMI Auto (HDMI automatic lip sync mode)
If the connected video monitor is connected to the HDMI OUT jack 
of this unit and compatible with the automatic audio and video 
synchronization function (automatic lip sync), this unit adjusts the 
audio and video synchronization automatically. Use this feature to 
activate or deactivate the automatic lip sync.

Adjust the bass/treble balance of your speakers.

Adjust the bass/treble balance of your headphones.

Automatically bypasses the tone control circuitry to 
provide the purest signal possible when “Treble” and 
“Bass” are set to 0 dB.

Does not bypass the tone control circuitry.

Select this setting if the connected video monitor is 
compatible with the automatic lip sync. Use “Auto” to 
make fine adjustments of the audio and video 
synchronization.

Select this setting if the video monitor is not compatible 
with the automatic lip sync or you do not want to use the 
automatic lip sync. Use “Manual” to adjustment the 
audio and video synchronization.