Zhone 2004 Betriebsanweisung

Type “A” for RFC 2516 (PPoE with LLC) or “B” for RFC 2516 (PPoE 
with VC mux.

To delete a PVC, follow the steps below.

Type “3” on the ATM PVC Configuration menu (Figure 4.7) to select 
Delete PVC. The IAD displays the port list and a prompt.

Type the port number to delete and press Enter.

To delete the PVC, type “Y”, or cancel the deletion by typing any other 
character. The IAD saves the configuration and displays the PVC 
Configuration menu where you may continue with other PVC management 
tasks.

To display a list of current PVCs, type “4” on the ATM PVC 
Configuration menu (Figure 4.7) to display the port table with associated 
PVCs:

When you have finished viewing the list, press any key to return to the 
ATM PVC Configuration menu.

To configure ATM options, type “4” on the WAN Configuration menu 
(ATM) to display the ATM Configuration menu (Figure 4.13). Current 
datalink protocol on the WAN Configuration menu must be set to ATM to see 
the ATM Configuration menu. Remember always to reset the IAD when you 
finish ATM configuration. (You may wait to reset until all changes have been 
made.)

Each of the options on this menu is described in detail below.