ZyXEL p-334 Benutzerhandbuch

Prestige 334 User’s Guide

207

Chapter 19 Menu 1 General Setup

Figure 91   Menu 1 General Setup.

2 Fill in the required fields. Refer to the table shown next for more information about these 

fields.

Menu 1 - General Setup

         System Name=
         Domain Name= zyxel.com.tw
         First System DNS Server= From ISP
           IP Address= N/A
         Second System DNS Server= From ISP
           IP Address= N/A
         Third System DNS Server= From ISP
           IP Address= N/A
         Edit Dynamic DNS= No
Press ENTER to Confirm or ESC to Cancel:

Table 65   Menu 1 General Setup

System Name

Choose a descriptive name for identification purposes. It is recommended you 

enter your computer’s “Computer name” in this field. This name can be up to 30 

alphanumeric characters long. Spaces are not allowed, but dashes “-” and 

underscores "_" are accepted.

Domain Name

Enter the domain name (if you know it) here. If you leave this field blank, the ISP 

may assign a domain name via DHCP. You can go to menu 24.8 and type "sys 

domain name" to see the current domain name used by your router.
The domain name entered by you is given priority over the ISP assigned domain 

name. If you want to clear this field just press [SPACE BAR] and then [ENTER]. 

First System DNS 

Server
Second System 

DNS Server

Third System DNS 
Server

DNS (Domain Name System) is for mapping a domain name to its corresponding 

IP address and vice versa. The DNS server is extremely important because 

without it, you must know the IP address of a machine before you can access it. 

The Prestige uses a system DNS server (in the order you specify here) to resolve 

domain names for VPN, DDNS and the time server.
Press [SPACE BAR] and then [ENTER] to select an option. Select From ISP if 

your ISP dynamically assigns DNS server information (and the Prestige's WAN IP 

address). The IP Address field below displays the (read-only) DNS server IP 

address that the ISP assigns.
Select User-Defined if you have the IP address of a DNS server. Enter the DNS 

server's IP address in the IP Address field. If you select User-Defined, but leave 

the IP address set to 0.0.0.0, User-Defined changes to None after you save your 

changes. If you set a second choice to User-Defined, and enter the same IP 

address, the second User-Defined changes to None after you save your 

changes.
Select None if you do not want to configure DNS servers. If you do not configure 

a system DNS server, you must use IP addresses when configuring VPN, DDNS 

and the time server.

Edit Dynamic DNS Press [SPACE BAR] and then [ENTER] to select Yes or No (default). Select Yes 

to configure Menu 1.1: Configure Dynamic DNS discussed next.

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to 

save your configuration, or press [ESC] at any time to cancel.