ZyXEL NBG-318S Anleitung Für Quick Setup

ENGLISH

12

7 When you are finished setting up your powerline network, connect your powerline 

adapters to the devices you want on your network, such as computers and a router for 
connection to the Internet. See the figure on page 

 for an example.

V

If the login screen does not display, follow these steps.

1 Check your computer’s IP address settings or make sure your computer is set to 

receive an IP address dynamically (see the appendix in the User’s Guide).

2 If you cannot access the web configurator using Internet Explorer in Windows XP or 

Windows Server 2003, check your web browser’s security settings (see the appendix in 
the User’s Guide).

V

If you cannot access the Internet when your computer is connected to one 
of the NBG-318S’s LAN ports, follow these steps:

1 If an LED does not turn on, check your connections. Then turn the NBG-318S off, wait 

for a few seconds and turn it back on.

2 Log into the web configurator again. Make sure you type in the information correctly. 

For example, if your account has a user name and password, make sure you type it 
correctly. In addition, if you are not sure which encapsulation your ISP uses, contact 
your ISP.

3 Log in and go to Advanced setup. Go to Maintenance > Sys Op Mode. Select Router 

(Ethernet WAN) if you connect to the Internet through your Ethernet port. Select 
Router (HomePlug WAN) if you connect to the Internet through a HomePlug 
connection.

4 If you are using a new Internet account, contact your ISP to make sure it is active.
5 If you still have problems, see Troubleshooting in the User’s Guide.

V

If you cannot access the Internet from the wireless network, do the 
following.

1 On a computer connected to the NBG-318S, make sure your NBG-318S and the 

computers on your wireless network are using the same wireless and wireless security 
settings. See the chapter on Wireless LAN in the User’s Guide for more information.