ZyXEL 2WG Betriebsanweisung

 Chapter 11 Wi-Fi Screens

ZyWALL 2WG User’s Guide

"

If you do not enable any wireless security on your ZyWALL, your network is 
accessible to any wireless networking device within range.

Figure 141   WIRELESS > Wi-Fi > Security: None

The following table describes the wireless LAN security labels in this screen.

Static WEP provides a mechanism for encrypting data using encryption keys. Both the AP and 
the wireless stations must use the same WEP key to encrypt and decrypt data. 
Your ZyWALL allows you to configure up to four 64-bit, 128-bit or 152-bit WEP keys, but 
only one key can be used at any one time. 
In order to configure and enable WEP encryption, click WIRELESS > Wi-Fi > Security > 
Edit. 

Security Mode This field displays the security mode this security profile uses.

Action

Click the edit icon to configure security settings for that profile.
Click the reset default icon to clear all user-entered configuration information and 

return the security profile to its factory defaults.

Table 58   WIRELESS > Wi-Fi > Security (continued) 

Table 59   WIRELESS > Wi-Fi > Security: None  

Name

Type a name (up to 32 printable 7-bit ASCII characters) to identify this security profile.

Security Mode Select None to allow wireless clients to communicate with the access points without 

any data encryption.

Apply

Click Apply to save your customized settings and exit this screen.

Cancel

Click Cancel to exit this screen without saving.