ZyXEL 2WG Betriebsanweisung

Chapter 15 IPSec VPN Screens

ZyWALL 2WG User’s Guide

Figure 201   SECURITY > VPN > VPN Rules (Manual) > Edit 

The following table describes the labels in this screen. 

Table 90   SECURITY > VPN > VPN Rules (Manual) > Edit

Property

Active 

Select this check box to activate this VPN policy.

Name

Type up to 32 characters to identify this VPN policy. You may use any character, 

including spaces, but the ZyWALL drops trailing spaces.

Allow NetBIOS 

Traffic Through 

IPSec Tunnel

This field is not available when the ZyWALL is in bridge mode.
NetBIOS (Network Basic Input/Output System) are TCP or UDP packets that 

enable a computer to find other computers. It may sometimes be necessary to 

allow NetBIOS packets to pass through VPN tunnels in order to allow local 

computers to find computers on the remote network and vice versa.
Select this check box to send NetBIOS packets through the VPN connection.

Local Network

Specify the IP addresses of the devices behind the ZyWALL that can use the VPN 

tunnel. The local IP addresses must correspond to the remote IPSec router's 

configured remote IP addresses. 
Two active SAs cannot have the local and remote IP address(es) both the same. 

Two active SAs can have the same local or remote IP address, but not both. You 

can configure multiple SAs between the same local and remote IP addresses, as 

long as only one is active at any time.