ZyXEL 2WG Betriebsanweisung
Chapter 28 Maintenance Screens
ZyWALL 2WG User’s Guide
513
Figure 313 Synchronization Fail
28.5 The Device Mode Screen
28.5.1 The Device Mode Screen (Router)
Click MAINTENANCE > Device Mode to open the following screen. Use this screen to
configure your ZyWALL as a router or a bridge.
In router mode, the ZyWALL functions as a router. The ZyWALL routes traffic traveling
between the ZyWALL's interfaces and filters and inspects packets.
In router mode, the ZyWALL can get an IP address from a DHCP server. It can also serve as a
DHCP server to assign IP addresses to your local computers. The LAN, WAN, DMZ and
WLAN interfaces all have different IP addresses. The ZyWALL also provides NAT, port
forwarding, policy routing, and DNS in router mode. These features allow you to set up
private network. See
configure your ZyWALL as a router or a bridge.
In router mode, the ZyWALL functions as a router. The ZyWALL routes traffic traveling
between the ZyWALL's interfaces and filters and inspects packets.
In router mode, the ZyWALL can get an IP address from a DHCP server. It can also serve as a
DHCP server to assign IP addresses to your local computers. The LAN, WAN, DMZ and
WLAN interfaces all have different IP addresses. The ZyWALL also provides NAT, port
forwarding, policy routing, and DNS in router mode. These features allow you to set up
private network. See
mode.
The following applies when the ZyWALL is in router mode.
The following applies when the ZyWALL is in router mode.
Figure 314 MAINTENANCE > Device Mode (Router Mode)