ZyXEL 2WG Betriebsanweisung

 Chapter 31 WAN and Dial Backup Setup

ZyWALL 2WG User’s Guide

Figure 344   3G Modem Setup in WAN Setup  

The following table describes the fields in this screen.

                               Menu 2 - WAN Setup

                         WAN 1 MAC Address:
                           Assigned By= Factory default
                           IP Address= N/A

                         Dial-Backup:
                           Active= No
                           Port Speed= 115200
                           AT Command String:
                             Init= at&fs0=0
                           Edit Advanced Setup= No

                         3G Modem Setup:
                           Init= Configure APN
                           APN = internet
                           PIN code= 0000

                    Press ENTER to Confirm or ESC to Cancel:

Table 206   3G Modem Setup in WAN Setup 

3G Modem 

Setup

Init

Select Configure APN to enter the APN (Access Point Name) if your ISP gives you 

the APN only. 
Select Configure directly to and enter the initial string and APN if you know how to 

configure or your ISP provides a string, which would include the APN, to initialize the 

3G card.

Init

This field is available when you select Configure directly in the field above.
You can enter up to 72 ASCII printable characters. Spaces are allowed.

APN

This field is available when you select Configure APN in the field above.
Enter the APN (Access Point Name) provided by your service provider.  Connections 

with different APNs may provide different services (such as Internet access or MMS 

(Multi-Media Messaging Service)) and charge method.
You can enter up to 31 ASCII printable characters. Spaces are allowed.

PIN Code

A PIN (Personal Identification Number) code is a key to a 3G card. Without the PIN 

code, you cannot use the 3G card.
Enter the PIN code (four to eight digits, 0000 for example) provided by your ISP. If 

you enter the PIN code incorrectly, the 3G card may be blocked by your ISP and you 

cannot use the account to access the Internet.
If your ISP disabled PIN code authentication, enter an arbitrary number.

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to 

save your configuration, or press [ESC] at any time to cancel.