ZyXEL 2WG Betriebsanweisung

Chapter 37 Remote Node Setup

ZyWALL 2WG User’s Guide

There are three variations of menu 11.1 depending on whether you choose Ethernet 
Encapsulation, PPPoE Encapsulation or PPTP Encapsulation. You must choose the 
Ethernet option when the WAN port is used as a regular Ethernet. The first menu 11.1 screen 
you see is for Ethernet encapsulation shown next. 

Figure 367   Menu 11.1: Remote Node Profile for Ethernet Encapsulation

The following table describes the fields in this menu.

         Menu 11.1 - Remote Node Profile

Rem Node Name= WAN 1                 Route= IP
Active= Yes                          

Encapsulation= Ethernet              Edit IP= No
Service Type= Standard               Session Options:
                                       Schedules=
Outgoing:                              Edit Filter Sets= No
  My Login= N/A
  My Password= N/A                   
  Retype to Confirm= N/A
  Server= N/A
  Relogin Every (min)=  N/A

Press ENTER to Confirm or ESC to Cancel:

Table 217   Menu 11.1: Remote Node Profile for Ethernet Encapsulation

Rem Node 

Name

Enter a descriptive name for the remote node. This field can be up to eight 

characters. 

Active

Press [SPACE BAR] and then [ENTER] to select Yes (activate remote node) or No 

(deactivate remote node).

Encapsulation

Ethernet is the default encapsulation. Press [SPACE BAR] and then [ENTER] to 

change to PPPoE or PPTP encapsulation. 

Service Type

Press [SPACE BAR] and then [ENTER] to select from Standard, RR-Toshiba 

(RoadRunner Toshiba authentication method), RR-Manager (RoadRunner 

Manager authentication method), RR-Telstra or Telia Login. Choose one of the 

RoadRunner methods if your ISP is Time Warner's RoadRunner; otherwise choose 

Standard.

Outgoing

My Login

This field is applicable for PPPoE encapsulation only. Enter the login name 

assigned by your ISP when the ZyWALL calls this remote node. Some ISPs append 

this field to the Service Name field above (e.g., jim@poellc) to access the PPPoE 

server. 

 My Password

Enter the password assigned by your ISP when the ZyWALL calls this remote node. 

Valid for PPPoE encapsulation only. 

Retype to 

Confirm

Type your password again to make sure that you have entered it correctly.