ZyXEL 2WG Betriebsanweisung

 Chapter 2 Introducing the Web Configurator

ZyWALL 2WG User’s Guide

3G Card ESN

This field is available only when you insert a CDMA (Code Division Multiple 

Access) 3G card.
This shows the ESN (Electronic Serial Number) of the inserted CDMA 3G card. 

The ESN is the serial number of a CDMA 3G card and is similar to the IMEI on a 

GSM or UMTS 3G card.

Enter PIN code 

again

If the PIN code you specified in the WAN 2 screen is not the right one for the card 

you inserted, this field displays allowing you to enter the correct PIN code. Enter 

the PIN code (four to eight digits) for the inserted 3G card.

Apply

Click Apply to save the correct PIN code and replace the one you specified in the 

WAN 2 screen.

PUK Code

If you enter the PIN code incorrectly three times, the SIM card will be blocked by 

your ISP and you cannot use the account to access the Internet. You should get 

the PUK (Personal Unblocking Key) code (four to eight digits) from your ISP. 

Enter the PUK code to enable the SIM card. If an incorrect PUK code is entered 

10 times, the SIM card will be disabled permanently. You then need to contact 

your ISP for a new SIM card.

New PIN Code

Configure a PIN code for the SIM card. You can specify any four to eight digits to 

have a new PIN code or enter the previous PIN code.

Confirm New PIN 

Code

Enter the PIN code again for confirmation.

Apply

Click Apply to save your changes in this section.

Reset budget 

counters, resume 

budget control

This field displays if you have enabled budget control but insert a 3G card with a 

different user account from the one for which you configured budget control.
Select this option to have the ZyWALL do budget calculation starting from 0 but 

use the previous settings.

Resume budget 

control

This field displays if you have enabled budget control but insert a 3G card with a 

different user account from the one for which you configured budget control.
Select this option to have the ZyWALL keep the existing statistics and continue 

counting.

Disable budget 

control

This field displays if you have enabled budget control but insert a 3G card with a 

different user account from the one for which you configured budget control.
Select this option to disable budget control. 
If you want to enable and configure new budget control settings for the new user 

account, go to the WAN 2 screen.
The ZyWALL keeps the existing statistics if you do not change the budget control 

settings. You could reinsert the original card and enable budget control to have 

the ZyWALL continue counting the budget control statistics.

Apply

Click Apply to save your changes in this section.

Enter modem 

unlock code

This field only displays when you insert a 3G card and the internal modem on the 

3G card is blocked.
Enter a key to enable the internal modem on your 3G card. By default, the key is 

the last four digits of your phone number used to dial up the 3G connection. 

Otherwise, you need to get the key from your service provider.

Apply

Click Apply to save your changes in this section.

Remaining Time 

Budget

This field is available only when you enable budget control in the 3G (WAN 2) 

screen.
This shows the amount of time (in hours and minutes) the 3G connection can still 

be used before the ZyWALL takes the actions you specified in the 3G (WAN 2) 

screen.

Table 3   Web Configurator HOME Screen in Router Mode (continued)