ZyXEL 2WG Betriebsanweisung

 Chapter 46 Remote Management

ZyWALL 2WG User’s Guide

Remote management over LAN or WAN will not work when:

1 A filter in menu 3.1 (LAN) or in menu 11.5 (WAN) is applied to block a Telnet, FTP or 

Web service. 

2 You have disabled that service in menu 24.11.
3 The IP address in the Secure Client IP field (menu 24.11) does not match the client IP 

address. If it does not match, the ZyWALL will disconnect the session immediately.

4 There is an SMT console session running.
5 There is already another remote management session with an equal or higher priority 

running. You may only have one remote management session running at one time. 

6 There is a firewall rule that blocks it.

Authenticate 

Client 

Certificates

Select Yes by pressing [SPACE BAR], then [ENTER] to require the SSL client to 

authenticate itself to the ZyWALL by sending the ZyWALL a certificate. To do that 

the SSL client must have a CA-signed certificate from a CA that has been imported 

as a trusted CA on the ZyWALL (see 

 for details).

Once you have filled in this menu, press [ENTER] at the message "Press ENTER to Confirm or ESC to 

Cancel" to save your configuration, or press [ESC] to cancel.

Table 245   Menu 24.11 – Remote Management Control (continued)