ZyXEL 2WG Betriebsanweisung

 Chapter 47 IP Policy Routing

ZyWALL 2WG User’s Guide

2 Select Yes in the LAN field in menu 25.1.1 to apply the policy to packets received on the 

LAN port.

3 Check Menu 25 - IP Routing Policy Summary to see if the rule is added correctly.
4 Create another rule in menu 25.1 for this rule to route packets from any host (IP=0.0.0.0 

means any host) with protocol TCP and port FTP access through another gateway 
(192.168.1.100).

Figure 460   IP Routing Policy Example 2

5 Select Yes in the LAN field in menu 25.1.1 to apply the policy to packets received on the 

LAN port.

6 Check Menu 25 - IP Routing Policy Summary to see if the rule is added correctly.

            
 Menu 25.1 - IP Routing Policy Setup

Rule Index= 2                           Active= No
Criteria:
  IP Protocol    = 6
  Type of Service= Don't Care           Packet length= 10
  Precedence     = Don't Care             Len Comp= Equal
  Source:
    addr start= 0.0.0.0                 end= N/A
    port start= 0                       end= N/A
  Destination:
    addr start= 0.0.0.0                 end= N/A
    port start= 20                      end= 21
Action= Matched
   Gateway Type= IP Address
   Gateway addr   = 192.168.1.100     Redirect packet= N/A
   Type of Service= Don't Care        Log= No
   Precedence     = Don't Care
Edit policy to packets received from= No

                    Press ENTER to Confirm or ESC to Cancel: