ZyXEL p-660h-61 Betriebsanweisung
Prestige 660H Series User’s Guide
5-4
LAN
Setup
Figure 5-2 LAN Setup
The following table describes the fields in this screen.
Table 5-1 LAN Setup
LABEL
DESCRIPTION
DHCP
DHCP
If set to Server, your Prestige can assign IP addresses, an IP default gateway and DNS
servers to Windows 95, Windows NT and other systems that support the DHCP client.
servers to Windows 95, Windows NT and other systems that support the DHCP client.
If set to None, the DHCP server will be disabled.
If set to Relay, the Prestige acts as a surrogate DHCP server and relays DHCP requests and
responses between the remote server and the clients. Enter the IP address of the actual,
remote DHCP server in the Remote DHCP Server field in this case.
responses between the remote server and the clients. Enter the IP address of the actual,
remote DHCP server in the Remote DHCP Server field in this case.
When DHCP is used, the following items need to be set:
Client IP Pool
Starting Address
Starting Address
This field specifies the first of the contiguous addresses in the IP address pool.
Size of Client IP Pool
This field specifies the size or count of the IP address pool.
Primary DNS Server
Enter the IP addresses of the DNS servers. The DNS servers are passed to the DHCP clients
along with the IP address and the subnet mask.
along with the IP address and the subnet mask.
Secondary DNS
Server
Server
As above.
Remote DHCP
Server
Server
If Relay is selected in the DHCP field above then enter the IP address of the actual remote
DHCP server here.
DHCP server here.