ZyXEL p-660r-t1 v2 Veröffentlichungshinweis
ZyXEL Confidential
ProblemCategory: New Defect
Problem Symptom: There is not user mode
Problem Condition: This FW can not find user mode,use password ”user” also
can not login user mode
6[BUG FIX]
SPRID: 061031179
ProblemCategory: New Defect
Problem Symptom: Wizard can not work correctly
Problem Condition: 1.There is not login page to login Wizard page and you must
first login in Admin mode then enter Wizard mode. 2.You must configure to
RFC1483 mode then Wizard can work correctly,else it can not work.
Modification in V3.40(APT.0)b2 | 10/24/2006
Problem Symptom: There is not user mode
Problem Condition: This FW can not find user mode,use password ”user” also
can not login user mode
6[BUG FIX]
SPRID: 061031179
ProblemCategory: New Defect
Problem Symptom: Wizard can not work correctly
Problem Condition: 1.There is not login page to login Wizard page and you must
first login in Admin mode then enter Wizard mode. 2.You must configure to
RFC1483 mode then Wizard can work correctly,else it can not work.
Modification in V3.40(APT.0)b2 | 10/24/2006
1. create this project with new gui
Modification in V3.40(APT.0)b1 | 08/16/2006
2. Create this project.
Modification in V3.40(APT.0)b1 | 08/16/2006
2. Create this project.
Known Issues:
1. If UPNP is disabled than MSN messenger whiteboard doesn't work behind NAT.
2. The TR-067 Loop test failure.
3. If there are two or more PVCs with CBR or VBR QOS type and the total PCR
2. The TR-067 Loop test failure.
3. If there are two or more PVCs with CBR or VBR QOS type and the total PCR
requirement exceed the line rate then the bandwidth distribution between those PVCs is
unpredictable.
unpredictable.
4. Setup two PVCs with 1483 bridge, each PVC with 500Kbps upstream and 10Mbps
downstream traffic. If packet size is 1500 The CPU loading is 88%. The CPU loading is
100% if packet size is 1024.
100% if packet size is 1024.
5. The VBR property of TrendChip is different form the others.
6. The value of MBS can’t be too large. Ex 10000.
7. F/W upgrade in eWC can not work with IE 5.0.3315.
8. MAC OS can’t login the WEBGUI through IE 5.2.
9. When we do the ETSI-101388 test with ALC1224-73, the downstream will have CRC
6. The value of MBS can’t be too large. Ex 10000.
7. F/W upgrade in eWC can not work with IE 5.0.3315.
8. MAC OS can’t login the WEBGUI through IE 5.2.
9. When we do the ETSI-101388 test with ALC1224-73, the downstream will have CRC
error and ADSL will retrain.
10. Use ax/4000 test VBR have problem.
11. Use ax/4000 test priority have problem in especially setting.
12. Any IP works fine at the first time, but after power on and off, it won’t work until 10
11. Use ax/4000 test priority have problem in especially setting.
12. Any IP works fine at the first time, but after power on and off, it won’t work until 10
minutes later.
Modifications:
Modification in V3.40(APT.1)b1 | 02/06/2007
1. This version is based on P-660R-T1 v2(AGJ.3)C0
Modification in V3.40(APT.0)b3 | 11/07/2006
1. This version is based on P-660R-T1 v2(AGJ.3)C0
Modification in V3.40(APT.0)b3 | 11/07/2006
1 remove SPTGEN
2 add dynamic button in more connections
4/16