ZyXEL p-792h Veröffentlichungshinweis
ZyXEL Confidential
previous routing entry still keep. it can see in CI command:ip route status.
Condition: In menu4 or menu11,Configure Enet Encap=static IP, then change to
PPPoE dynamic, in menu24.8, check the route table, the Enet Encap entry still
existed.unless you restart the DUT.
Condition: In menu4 or menu11,Configure Enet Encap=static IP, then change to
PPPoE dynamic, in menu24.8, check the route table, the Enet Encap entry still
existed.unless you restart the DUT.
7. [BUG FIXED] 050909376
Symptom: After save DNS server, In CI command: ip ping www.hinet.net, it can not
be work and it must reboot.
Condition: We save DNS server in menu 3.2 after reset default rom file and if we don’t
reset system and issue ”ip ping www.hinet.net” that it can not be work and it must
reboot.
be work and it must reboot.
Condition: We save DNS server in menu 3.2 after reset default rom file and if we don’t
reset system and issue ”ip ping www.hinet.net” that it can not be work and it must
reboot.
8. [BUG FIXED] 050909377
Symptom: When DUT use static IP and set DNS server address in GUI->wizard, DUT
won’t resolve domain name successfully until reboot
Condition: Step1 Go to GUI, configure DUT use static IP and set DNS server, then go
to Maintenance->Diagnostic, try to resolve domain name, but failed; Step2 Reboot
DUT, it works fine; Step3 This many cause TMSS/AV/CAC/DDNS functions doesn’t
work for these functions need DUT resolve domain name.
won’t resolve domain name successfully until reboot
Condition: Step1 Go to GUI, configure DUT use static IP and set DNS server, then go
to Maintenance->Diagnostic, try to resolve domain name, but failed; Step2 Reboot
DUT, it works fine; Step3 This many cause TMSS/AV/CAC/DDNS functions doesn’t
work for these functions need DUT resolve domain name.
9. [BUG FIXED] 050909378
Symptom& Condition: enter eWC NAT, click the edit detail of full feature will apply
full feature.
full feature.
10. [BUG FIXED] 050909379
Symptom& Condition: While delete menu4, then go to GUI to change NAT mode and
then apply in GUI, then go to SMT menu 24.1will cause crash.
then apply in GUI, then go to SMT menu 24.1will cause crash.
11. [BUG FIXED] 050909380
Symptom: PPPOE nailed-up work have problem
Condition: Step1 use PPPOE and nailed-it up; Step2 in SMT menu 26.1 set a schedule
start time 00:03 and duration time is 00:02 and force down; Step3 in menu11.1
schedule set =1, now time is 00:02 when time is 00:03 then PPPOE turn down, but time
is 00:05 the PPPOE can not turn up, then in menu 24.8 command “d d 1” still can not
turn up.
Condition: Step1 use PPPOE and nailed-it up; Step2 in SMT menu 26.1 set a schedule
start time 00:03 and duration time is 00:02 and force down; Step3 in menu11.1
schedule set =1, now time is 00:02 when time is 00:03 then PPPOE turn down, but time
is 00:05 the PPPOE can not turn up, then in menu 24.8 command “d d 1” still can not
turn up.
Modifications in V3.40(BZ.1)C0 | 6/28/2005 13:32:11
1. [FEATURE CHANGED] Change to FCS.
Modifications in V3.40(BZ.1)b3 | 6/22/2005 9:53:09
1. [FEATURE CHANGED] Support new modem code A.423.
Modifications in V3.40(BZ.1)b2 | 3/28/2005 9:09:08
1. [FEATURE CHANGED] Support new modem code R3.0.1
2. [FEATURE CHANGED] Support new MAC, atwz , sys atwz command
3. [FEATURE CHANGED] Change hw version to 1 in bootbase , and after we change
AFE , this f/w can support new hardware and old hardware.
4/27