ZyXEL nbg-4615 Betriebsanweisung
Chapter 12 WISP Mode
NBG4615 User’s Guide
100
12.3 What You Need to Know
With the exception of the Wireless LAN screen, the Monitor, Configuration and
Maintenance screens in WISP mode are similar to the ones in Router mode.
See
Maintenance screens in WISP mode are similar to the ones in Router mode.
See
through
of this User’s Guide.
12.3.1 Setting your NBG4615 to WISP Mode
1
Log into the Web Configurator if you haven’t already. See the Quick start Guide for
instructions on how to do this.
instructions on how to do this.
2
To set your NBG4615 to WISP Mode, go to Maintenance > Sys OP Mode >
General and select WISP Mode.
General and select WISP Mode.
Figure 63 Changing to WISP mode
Note: You have to log in to the Web Configurator again when you change modes.As
soon as you do, your NBG4615 is already in WISP mode.
3
When you select WISP Mode, the following pop-up message window appears.
Figure 64 Pop up window for WISP mode
Click OK. The Web Configurator refreshes once the change to WISP mode is
successful.
successful.
12.3.2 Accessing the Web Configurator in WISP Mode
To login to Web Configurator in WISP Mode, do the following: