ZyXEL nbg-4615 Betriebsanweisung

Chapter 14 Wireless LAN

NBG4615 User’s Guide

Click Network > Wireless LAN to open the General screen.

Figure 75   Network > Wireless LAN > General 

The following table describes the general wireless LAN labels in this screen.

Table 42   Network > Wireless LAN > General

Wireless LAN

This shows whether the wireless LAN is ON or OFF. You can enable or 
disable the wireless LAN by using the WLAN switch located on the back 
panel of the NBG4615.

Network 
Name(SSID)

or

Name(SSID1
~3) 

The SSID (Service Set IDentity) identifies the Service Set with which a 
wireless client is associated. Enter a descriptive name (up to 32 printable 
characters found on a typical English language keyboard) for the wireless 
LAN. 

You can configure up to four SSIDs to enable multiple BSSs (Basic Service 
Sets) on the NBG4615. This allows you to use one access point to provide 
several BSSs simultaneously. You can then assign varying security types 
to different SSIDs. Wireless clients can use different SSIDs to associate 
with the same access point.

Hide SSID

Select this check box to hide the SSID in the outgoing beacon frame so a 
station cannot obtain the SSID through scanning using a site survey tool.

Enable Intra-
BSS Traffic

A Basic Service Set (BSS) exists when all communications between 
wireless clients or between a wireless client and a wired network client go 
through one access point (AP). 

Intra-BSS traffic is traffic between wireless clients in the BSS. When Intra-
BSS is enabled, wireless clients can access the wired network and 
communicate with each other. When Intra-BSS is disabled, wireless clients 
can still access the wired network but cannot communicate with each 
other.