ZyXEL nbg-4615 Betriebsanweisung

Chapter 3 ZyXEL NetUSB Share Center Utility

NBG4615 User’s Guide

In this example, a USB printer, fax machine, and scanner are all connected to a 
USB hub. The hub is in turn connected directly to the NBG4615. Any computer 
with a ZyXEL NetUSB Share Center Utility installed on it and which is connected to 
the NBG4615’s LAN ports can access these devices.

Note: A USB hub attached to the NBG4615 requires its own power adapter.

This section shows you how to get started using the ZyXEL NetUSB Share Center 
Utility.

Install the ZyXEL NetUSB

 

Share Center Utility on each computer connected to the 

NBG4615.

Connect a USB device to the USB port on the NBG4615. 

Note: If you are connecting multiple devices to the NBG4615, first connect a USB hub 

to the NBG4615 then connect your other USB devices to it.

Run the ZyXEL NetUSB

 

Share Center Utility to display a list of all connected USB 

devices, then use it to connect your computer to them.

Before you can access USB devices connected to the NBG4615, you must first 
install the ZyXEL NetUSB

 

Share Center Utility on any computer on your LAN to 

which you want to allow access to these devices.

Note: In order to properly use the utility with your NBG4615, ensure that the 

NBG4615 firmware is version v1.00(BWQ.0) or higher. See 

 for information on updating your device’s firmware.

To install the ZyXEL NetUSB

 

Share Center Utility:

Insert the disc that came with your NBG4615 into your computer’s disc drive.

Run the Setup program by double-clicking it and then follow the on-screen 
instructions for installing it on your computer.

Note: The following operating systems are supported: Windows XP/Vista/7 (32 and 

64-bit versions).