ZyXEL p-330w Betriebsanweisung
ZyXEL P-330W User’s Guide
61
Chapter 5 Wireless
Figure 33 Wireless Security Setup: WPA-PSK
The following table describes the labels in this screen.
Table 23 Wireless Security Setup: WPA-PSK
LABEL
DESCRIPTION
Encryption
Choose WPA from the drop-down list box for TKIP encryption.
Choose WPA2 (AES) from the drop-down list box to use WPA2’s AES encryption.
Choose WPA2 Mixed from the drop-down list box to allow both TKIP or AES
Choose WPA2 (AES) from the drop-down list box to use WPA2’s AES encryption.
Choose WPA2 Mixed from the drop-down list box to allow both TKIP or AES
encryption.
WPA
Authentication
Mode
Choose Personal to enable PSK mode.
WPA Format
Choose whether to enter the PSK by either Passphrase or Hex key.
Pre-Shared Key
The encryption mechanisms used for WPA and WPA-PSK are the same. The only
difference between the two is that WPA-PSK uses a simple common password,
instead of user-specific credentials.
Type a pre-shared key from 8 to 63 case-sensitive ASCII characters (including
Type a pre-shared key from 8 to 63 case-sensitive ASCII characters (including
spaces and symbols) or 64 hex characters.
Group Key Life
TIme
The Group Key Life Time is the rate at which the AP sends a new group key out
to all clients. The re-keying process is the WPA equivalent of automatically
changing the WEP key for an AP and all stations in a WLAN on a periodic basis.
Save
Click Save to save your changes back to the P-330W.
Reset
Click Reset to reload the previous configuration for this screen.