ZyXEL p-334wh Betriebsanweisung
P-334WH User’s Guide
30
Chapter 1 Getting to Know Your ZyXEL Device
Auto-crossover 10/100 Mbps Ethernet Interface(s)
These interfaces automatically adjust to either a crossover or straight-through Ethernet cable.
4-Port Switch
A combination of switch and router makes your ZyXEL Device a cost-effective and viable
network solution. You can add up to four computers to the ZyXEL Device without the cost of
a hub. Add more than four computers to your LAN by using a hub.
network solution. You can add up to four computers to the ZyXEL Device without the cost of
a hub. Add more than four computers to your LAN by using a hub.
Reset Button
The reset button is built into the rear panel. Use this button to restore the factory default
password to 1234; IP address to 192.168.1.1, subnet mask to 255.255.255.0 and DHCP server
enabled with a pool of 32 IP addresses starting at 192.168.1.33.
password to 1234; IP address to 192.168.1.1, subnet mask to 255.255.255.0 and DHCP server
enabled with a pool of 32 IP addresses starting at 192.168.1.33.
1.2.2 Non-Physical Features
Bandwidth Management
ZyXEL’s Bandwidth Management allows you to specify bandwidth classes based on an
application and/or subnet. You can allocate specific amounts of bandwidth capacity
(bandwidth budgets) to different bandwidth classes.
application and/or subnet. You can allocate specific amounts of bandwidth capacity
(bandwidth budgets) to different bandwidth classes.
Firewall
The ZyXEL Device is a stateful inspection firewall with DoS (Denial of Service) protection.
By default, when the firewall is activated, all incoming traffic from the WAN to the LAN is
blocked unless it is initiated from the LAN. The ZyXEL Device firewall supports TCP/UDP
inspection, DoS detection and prevention, real time alerts, reports and logs.
By default, when the firewall is activated, all incoming traffic from the WAN to the LAN is
blocked unless it is initiated from the LAN. The ZyXEL Device firewall supports TCP/UDP
inspection, DoS detection and prevention, real time alerts, reports and logs.
Content Filtering
The ZyXEL Device can also block access to web sites containing keywords that you specify.
You can define time periods and days during which content filtering is enabled and include or
exclude a range of users on the LAN from content filtering.
You can define time periods and days during which content filtering is enabled and include or
exclude a range of users on the LAN from content filtering.
Time and Date
The ZyXEL Device allows you to get the current time and date from an external server when
you turn on your ZyXEL Device. You can also set the time manually.
you turn on your ZyXEL Device. You can also set the time manually.
Universal Plug and Play (UPnP)
Using the standard TCP/IP protocol, the ZyXEL Device and other UPnP enabled devices can
dynamically join a network, obtain an IP address and convey its capabilities to other devices
on the network.
dynamically join a network, obtain an IP address and convey its capabilities to other devices
on the network.