ZyXEL P-2602HW Benutzerhandbuch

 Chapter 11 Voice

P-2602H(W)(L)-DxA User’s Guide

Each field is described in the following table.

Use this screen to activate and deactivate immediate dialing and set up call fallback. To access 
this screen, click VoIP > Phone > Common.

Table 57   Phone > Analog Phone > Advanced

Analog Phone

Select Phone1 or Phone2 in this field to configure each analog phone port.

Voice Volume 

Control

Speaking Volume

Enter the loudness that the ZyXEL Device uses for speech that it sends to the 

peer device. 
-1 is the quietest, and 1 is the loudest.

Listening Volume

Enter the loudness that the ZyXEL Device uses for speech that it receives from 

the peer device. -1 is the quietest, and 1 is the loudest.

Echo Cancellation

G.168 Active

Select this if you want to eliminate the echo caused by the sound of your voice 

reverberating in the telephone receiver while you talk.

Dialing Interval 

Select

Dialing Interval 

Select

Enter the number of seconds the ZyXEL Device should wait after you stop dialing 

numbers before it makes the phone call. The value depends on how quickly you 

dial phone numbers.
If you select Active Immediate Dial in VoIP > Phone > Common, you can press 

the pound key (#) to tell the ZyXEL Device to make the phone call immediately, 

regardless of this setting.

Voice Active 

Detector

Active VAD

Select this if the ZyXEL Device should stop transmitting when you are not 

speaking. This reduces the bandwidth the ZyXEL Device uses.

Auto Dial

Active Auto Dial

Select this if you want the ZyXEL Device to automatically dial the phone number 

you enter in the Auto Dial Phone Number field as soon as you take the phone off 

the hook.

Auto Dial Phone 

Number

If you select Active Auto Dial, enter the phone number you want the ZyXEL 

Device to automatically dial in this field.

Back

Click this to return to the Analog Phone screen without saving your changes.

Apply

Click this to save your changes.

Cancel

Click this to set every field in this screen to its last-saved value.