ZyXEL NBG-417N Benutzerhandbuch

Chapter 3 Introducing the Web Configurator

NBG-417N User’s Guide

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows 
individual clients to obtain TCP/IP configuration at start-up from a server. You can 
configure the NBG-417N’s LAN as a DHCP server or disable it. When configured as 
a server, the NBG-417N provides the TCP/IP configuration for the clients. If DHCP 
service is disabled, you must have another DHCP server on that network, or else 
the computer must be manually configured.

Click the DHCP Table (Details...) hyperlink in the Status screen. Read-only 
information here relates to your DHCP status. The DHCP table shows current 
DHCP client information (including IP Address, Host Name and MAC Address) 
of all network clients using the NBG-417N’s DHCP server.

Figure 6   Summary: DHCP Table

Remote 

MGMT

WWW

Use this screen to configure through which interface(s) 
and from which IP address(es) users can use HTTP to 
manage the NBG-417N.

UPnP

General

Use this screen to enable UPnP on the NBG-417N. 

Maintenance

System

General

Use this screen to view and change administrative settings 
such as system and domain names, password and 
inactivity timer.

Time 
Setting

Use this screen to change your NBG-417N’s time and date.

Logs

View Log

Use this screen to view the logs for the categories that you 
selected.

Tools

Firmware

Use this screen to upload firmware to your NBG-417N.

Configuratio
n

Use this screen to backup and restore the configuration or 
reset the factory defaults to your NBG-417N. 

Restart

This screen allows you to reboot the NBG-417N without 
turning the power off.

Sys OP 

Mode

General

This screen allows you to select whether your device acts 
as a Router or a Access Point.

Language

This screen allows you to select the language you prefer.

Table 4   Screens Summary