ZyXEL NBG-417N Benutzerhandbuch
Chapter 7 Wireless LAN
NBG-417N User’s Guide
92
7.9 WPS Station Screen
Use this screen when you want to add a wireless station using WPS. To open this
screen, click Network > Wireless LAN > WPS Station tab.
screen, click Network > Wireless LAN > WPS Station tab.
Note: Note: After you click Push Button on this screen, you have to press a similar
button in the wireless station utility within 2 minutes. To add the second wireless
station, you have to press these buttons on both device and the wireless station
again after the first 2 minutes.
station, you have to press these buttons on both device and the wireless station
again after the first 2 minutes.
Figure 51 WPS Station
The following table describes the labels in this screen.
7.10 Scheduling Screen
Use this screen to set the times your wireless LAN is turned on and off. Wireless
LAN scheduling is disabled by default. The wireless LAN can be scheduled to turn
LAN scheduling is disabled by default. The wireless LAN can be scheduled to turn
Table 32 WPS Station
LABEL
DESCRIPTION
Push Button
Use this button when you use the PBC (Push Button Configuration)
method to configure wireless stations’s wireless settings. See
method to configure wireless stations’s wireless settings. See
.
Click this to start WPS-aware wireless station scanning and the wireless
security information synchronization.
security information synchronization.
Or input
station’s PIN
number
station’s PIN
number
Use this button when you use the PIN Configuration method to
configure wireless station’s wireless settings. See
configure wireless station’s wireless settings. See
.
Type the same PIN number generated in the wireless station’s utility.
Then click Start to associate to each other and perform the wireless
security information synchronization.
Then click Start to associate to each other and perform the wireless
security information synchronization.