ZyXEL 793H Betriebsanweisung

P-793H User’s Guide

Use this menu to set up device mode, dynamic DNS and administrative information.

1 Enter 1 in the main menu to open Menu 1 - General Setup.
2 The Menu 1 - General Setup screen appears, as shown next. Fill in the required fields.

Figure 140   Menu 1: General Setup

The following table describes the fields in this menu.

                             Menu 1 - General Setup

                    System Name= P-793H
                    Location=
                    Contact Person's Name=
                    Domain Name=
                    Edit Dynamic DNS= No

                    Route IP= Yes
                    Bridge= No

Table 92   Menu 1: General Setup

System Name

Choose a descriptive name for identification purposes. It is recommended you enter 

your computer’s “Computer name” in this field. This name can be up to 30 

alphanumeric characters long. Spaces are not allowed, but dashes “-” and 

underscores "_" are accepted.

Location

Enter a descriptive name for the place where the ZyXEL Device is located. You can 

enter up to 31 characters, or you can leave this field blank.

Contact 

Person’s Name

Enter the name of the person to contact for questions about the ZyXEL Device. You 

can enter up to 30 characters, or you can leave this field blank.

Domain Name

Enter the domain name (if you know it) here. If you leave this field blank, the ISP 

may assign a domain name via DHCP. You can go to menu 24.8 and type "sys 

domain name" to see the current domain name used by your router.
The domain name entered by you is given priority over the ISP assigned domain 

name. If you want to clear this field just press [SPACE BAR] and then [ENTER]. 

Edit Dynamic 

DNS

Press [SPACE BAR] and then [ENTER] to select Yes or No (default). Select Yes to 

configure Menu 1.1: Configure Dynamic DNS discussed next.