ZyXEL 793H Betriebsanweisung

Chapter 24 LAN Setup

P-793H User’s Guide

From the main menu, enter 3 to open Menu 3 - LAN Setup to configure TCP/IP (RFC 1155) 
and DHCP setup. From menu 3, select the submenu option TCP/IP and DHCP Setup and 
press [ENTER]. The screen now displays

 

, 

as shown next. Not all fields are available on all models.

Figure 149   Menu 3.2: TCP/IP and DHCP Ethernet Setup

Follow the instructions in the next table to configure these fields.

                        Menu 3.2 - TCP/IP and DHCP Setup

                    DHCP Setup
                      DHCP= Server
                      Client IP Pool Starting Address= 192.168.1.33
                      Size of Client IP Pool= 32
                      Primary DNS Server= 0.0.0.0
                      Secondary DNS Server= 0.0.0.0
                      Remote DHCP Server= N/A
                    TCP/IP Setup:
                      IP Address= 192.168.1.1
                      IP Subnet Mask= 255.255.255.0
                      RIP Direction= Both
                        Version= RIP-2B
                      Multicast= IGMP-v2
                      IP Policies=
                      Edit IP Alias= No

Table 99   Menu 3.2: TCP/IP and DHCP Ethernet Setup

DHCP Setup

DHCP

This field enables/disables the DHCP server.
If set to Server, your ZyXEL Device will act as a DHCP server. You should 

configure the rest of the fields in this section except for Remote DHCP Server.
If set to Relay, the ZyXEL Device acts as a surrogate DHCP server and relays 

requests and responses between the remote server and the clients. The Remote 

DHCP Server needs to be set.
If set to None, the DHCP server will be disabled.

Client IP Pool 

Starting Address:

This field specifies the first of the contiguous addresses in the IP address pool.

Size of Client IP 

Pool

This field specifies the size, or count of the IP address pool.