ZyXEL 793H Betriebsanweisung

 Chapter 26 Remote Node Setup

P-793H User’s Guide

Move the cursor to the Edit IP/Bridge field in menu 11.1, then press [SPACE BAR] to select 
Yes. Press [ENTER]

 

to open Menu 11.3 - Remote Node Network Layer Options.

Figure 156   Menu 11.3: Remote Node Network Layer Options

Allocated 

Budget(min)

Enter the maximum amount of time (in minutes) each call can last. Enter 0 if 

there is no limit. With Period, you can set a limit on the total outgoing call time 

of the ZyXEL Device within a certain period of time. When the total outgoing 

call time exceeds the limit, the current call will be dropped and any future 

outgoing calls will be blocked.

Period(hr)

Enter how often (in hours) the Allocated Budget is reset. For example, if you 

can call for thirty minutes every hour, set the Allocated Budget to 30, and set 

this field to 1.

Schedule Sets

Enter the schedule sets that apply to this connection.

Nailed-Up 

Connection

Select this if you want the ZyXEL Device to automatically connect to your ISP 

when it is turned on and to remain connected all the time. This is not 

recommended if you pay for your Internet connected based on the amount of 

time you are connected.

Session Options

Edit Filter Sets

If you want to specify input and output filter sets for the WAN port, press 

[SPACE BAR] to select Yes and press [ENTER]. Menu 11.1.4 appears.

Idle Timeout(sec)

Enter the number of seconds the ZyXEL Device should wait while there is no 

Internet traffic before it automatically disconnects from the ISP. Enter a time 

interval between 10 and 9999 seconds.

Table 103   Menu 11.1: Remote Node Profile (node 8) (continued)

                  Menu 11.3 - Remote Node Network Layer Options

     IP Options:                          Bridge Options:
       IP Address Assignment = Static       Ethernet Addr Timeout(min)= N/A
       Rem IP Addr = 0.0.0.0
       Rem Subnet Mask= 0.0.0.0
       My WAN Addr= 0.0.0.0
       NAT= SUA Only
         Address Mapping Set= N/A
       Metric= 2
       Private= No
       RIP Direction= Both
         Version= RIP-2B
       Multicast= None
       IP Policies=