ZyXEL 793H Betriebsanweisung
Chapter 5 WAN Setup
P-793H User’s Guide
79
The following table describes the labels in this screen.
5.4.2 Configuring Advanced Internet Connection
Use this screen to edit your ZyXEL Device's advanced settings for more connections. Click
the Advanced Setup button in the Internet Connection screen. The screen appears as shown.
the Advanced Setup button in the Internet Connection screen. The screen appears as shown.
Figure 28 WAN > Internet Connection > Advanced Setup
Table 16 2wire-2line Service Mode
LABEL
DESCRIPTION
Service Type
Service Mode
Select 2wire-2line mode for the DSL connection. This means that the ZyXEL
Device is going to be a server connected to two client ZyXEL Devices.
Service Type
When you select 2wire-2line mode this field automatically changes to Server.
Line1 / Line 2
You can configure different connection rate settings for Line 1 and Line 2 DSL
connections.
Enable Rate
Adaption
Indicate whether or not the ZyXEL Device can adjust the speed of its connection
to that of the other device.
Transfer Max Rate
(Kbps)
This field is enabled if Service Type is Server. Set the maximum rate at which
the ZyXEL Device sends and receives information. The actual transfer rate will
be between this value and the minimum transfer rate you configure.
Transfer Min Rate
(Kbps)
This field is enabled if Service Type is Server. Set the minimum rate at which
the ZyXEL Device sends and receives information. The actual transfer rate will
be between this value and the maximum transfer rate you configure.
Standard Mode
Select the operational mode the ZyXEL Device uses in the DSL connection.
Annex A refers to connections over POTS and Annex B refers to connections
over ISDN lines.
Apply
Click Apply to save the changes.
Cancel
Click Cancel to begin configuring this screen afresh.
Advanced Setup
Click this button to display the Advanced WAN Setup screen and edit more
details of your WAN setup.