ZyXEL 793H Betriebsanweisung
Chapter 5 WAN Setup
P-793H User’s Guide
89
5.8.1 Advanced Backup Setup
Use this screen to change your ZyXEL Device’s advanced dial backup settings. Click WAN >
WAN Backup Setup > Advanced Setup. The screen appears as shown.
WAN Backup Setup > Advanced Setup. The screen appears as shown.
Figure 35 WAN > WAN Backup Setup > Advanced Setup
The following table describes the labels in this screen.
Table 22 WAN > WAN Backup Setup > Advanced Setup
LABEL
DESCRIPTION
Basic
Authentication
Type
Use the drop-down list box to select an authentication protocol for outgoing calls.
Options are:
CHAP/PAP - Your ZyXEL Device accepts either CHAP or PAP when requested by
CHAP/PAP - Your ZyXEL Device accepts either CHAP or PAP when requested by
this remote node.
CHAP - Your ZyXEL Device accepts CHAP only.
PAP - Your ZyXEL Device accepts PAP only.
CHAP - Your ZyXEL Device accepts CHAP only.
PAP - Your ZyXEL Device accepts PAP only.
Secondary
Phone Number
Type the backup phone number from the ISP. If the Primary Phone number is busy
or does not answer, your ZyWALL dials the Secondary Phone number, if available.
Some areas require dialing the pound sign # before the phone number for local
calls. Include a # symbol at the beginning of the phone numbers as required.
Dial Backup Port
Speed
Select the speed of the connection between the Dial Backup port and the external
device. Available speeds are 9600, 19200, 38400, 57600, 115200 or 230400 bps.
AT Command
Initial String
Enter the AT command string to initialize the WAN device. Consult the manual of
your WAN device connected to your Dial Backup port for specific AT commands.