Sharp MX-5500N Bedienungsanleitung
59
3
Set the number of copies (number of
sets) with the numeric keys.
sets) with the numeric keys.
Up to 999 copies (sets) can be set. When the [COLOR START]
key (
key (
) or the [BLACK & WHITE START] key (
) is
pressed, the copies will automatically be divided between the
master and slave machines.
If an odd number of copies is set, the master machine will print
the extra set.
master and slave machines.
If an odd number of copies is set, the master machine will print
the extra set.
If an incorrect number of copies is set...
Press the [CLEAR] key (
Press the [CLEAR] key (
) and then enter the correct number.
4
Press the [COLOR START] key (
)
or the [BLACK & WHITE START] key
(
(
).
Copying will begin.
If you are using the document glass, change originals and
press the [START] key. Repeat until all pages have been
scanned and then touch the [Read-End] key. (For the second
original and following originals, use the same [START] key as
you did for the first original.)
If you are using the document glass, change originals and
press the [START] key. Repeat until all pages have been
scanned and then touch the [Read-End] key. (For the second
original and following originals, use the same [START] key as
you did for the first original.)
The following screen appears when the [START] key is
pressed.
pressed.
After the message appears, tandem copying begins.
If tandem copying is not possible, the following screen appears.
To have the master machine make all copies, touch the [OK]
key. To cancel the job, touch the [Cancel] key.
key. To cancel the job, touch the [Cancel] key.
• To cancel scanning...
Press the [STOP] key (
).
• To cancel tandem copying...
Touch the [STOP] keys (
) on both the master machine and the slave machine.
or
Starting tandem operation.
Please wait.
Tandem output is not allowed.
Output all sets using master machine?
(Cancel will delete the job.)
Cancel
OK