SVP cdc-1050 Betriebsanweisung

 

 

 

This camera uses 2 AAA batteries. The batteries and SD card share the 

same compartment and door.   

1.  Slide the battery/SD card cover in the   

direction of the arrow, then lift to open. 

2.  Load the included batteries   

into the battery compartment. (a) 

3.  Insert the SD card into the slot. (b) 

4.  Close the battery/SD Card cover.   

1.  It is highly recommended that rechargeable batteries be 

used. 

2.  To improve battery performance, replace all installed 

batteries at the same time and keep batteries away from 
heat. 

3.  Do not mix battery types or it may cause a fire or 

explosion. Use only one battery type at one time. 

4. 

Batteries should be inserted in the battery compartment 
with the "+" and "-" sides facing correctly.

 

1.  Do not open the battery compartment while the USB file 

transfer is in process. 

2.  Once new batteries are loaded, users will need to reset 

the date and time. 

3.  Do not open the battery/SD card cover or remove the 

batteries when the camera is ON. Only remove the 
batteries and SD card when the camera is OFF. 

4.  If you do not plan on using the camera for a long period 

of time, please remove the batteries and SD card.