Plantronics 640E Betriebsanweisung
cHarging YoUr HEaDsEt
Prior to first use, the Plantronics Discovery
640E headset must be charged for a minimum
of 1 hour; 3 hours for full charge. An AC power
adapter is included. You may also charge
the headset using the AAA battery charger.
The headset status Indicator glows red while
charging and turns off when fully charged.
Using the AC Power AdAPter
1.
Plug the AC power adapter into the
base of the headset carrying pocket and
connect it to your power source.
2.
Insert the headset into the headset
carrying pocket.
Using the AAA BAttery
One battery will operate the headset for
up to 15 hours of talk time.
1.
Twist the bottom of the battery charger
anticlockwise and release the battery
holder.
2.
Insert the battery into the AAA battery
holder.
3.
Slide the battery holder back into the
battery charger and turn clockwise.
4.
Snap battery charger onto headset
carrying pocket.
5.
Insert the headset into the headset
carrying pocket.
PoWEring on anD off
1.
1.
Power on the headset by pressing and
holding the call control button until the
headset status indicator glows blue. If you
are wearing the headset, you will hear a
beep when the power turns on. The headset
status indicator will flash blue every 6
seconds when the headset power is on.
NOTE
When the headset is turned on, the
headset status indicator will indicate the
charge level of the headset.
Greater than 2/3 battery charge =
3 red flashes.
1/3 to 2/3 battery charge =
2 red flashes.
Less than 1/3 battery charge =
1 red flash.
2.
Power off the headset by pressing the call
control button for 6-8 seconds until the
headset status indicator glows red or until you
hear the beep. The headset status indicator
remains unlit when the power is off.
”BEEP”