Plantronics H151N Anleitung Für Quick Setup

Plantronics

Identify the
Components

Configure
the Headset

DUOPRO

®

FAMILY OF HEADSETS

Adjust
the Headset

Over-the-Ear
Configuration

tail adjusts (in and
out and side to side)
for stabilization and fit

Voice Tube
(removable)

Examine
the Additional
Features

Stabilizer
Bars

Clothing Clip

The clothing clip keeps
the headset properly
seated and free from
the cord’s weight.
Attach the clothing clip
at a comfortable level.

Quick Disconnect

This feature allows you to
place a call on hold and
move away from the phone
without removing the
headset.
When you separate the
Quick Disconnect, you
place an ongoing
conversation on hold.
Before using your headset,
join the Quick Disconnect to the mating connector of

the modular adapter cable.

To put your call on hold, grasp Quick Disconnect, as
shown, and pull straight apart. To resume your
conversation, reconnect the pieces.

Over-the-Head
Configuration

Headset
Receiver
outside
view setup
for right
ear use

Pivot Pin Holder reverses
direction for left ear use

Convert Headset
for Left Ear Use

Cable
to the Quick
Disconnect™
connector

Over-the-Ear Headset
4.1 To put on the headset, move
earloop away from headset
receiver and place earloop over
your ear.

4.2 Adjust the flexible earloop (up and
down and side to side) for stabilization
and fit as shown.

Over-the-Head Headset
4.3 Adjust headband length so
stabilizer bars rest above your ears.
If necessary, to increase or decrease
tension on your head, bend the metal
part of headband inward or outward
for desired comfort.
Behind-the-Head Headset
Place the assembled neckband so the
headset receiver (See 3.8-3.10) is over
the ear.
4.6 Adjust for comfort.
All Configurations
4.4 Push headset receiver close to
your ear until it feels comfortable and
you can hear sound from the
telephone clearly.
4.5 The end of the microphone boom
or voice tube should be placed a
distance of two fingers from the
corner of your mouth.

Over-the-Head

for right ear use

3.2

3.3

3.4

3.5

3.7

3.1

3.6

4.1

4.3

4.4

4.5

Cable
Retainer
see blow-up 3.5

Pivot Pin
Holder

Headset
Receiver
inside view

Ear Cushion
Foam Pad

1

7

Noise-Canceling (N)
Microphone Boom
(not removable)

Over-the-Ear

for right ear use

For all configurations:
3.1 Begin by disconnecting the headset
from its current right ear configuration.
3.2 Rotate the headset receiver clockwise
flipping it to the opposite direction.
The headset rotates only in one direction.

For noise-canceling N-models:
3.3 Pull out the microphone boom
and rotate clockwise to face the
opposite direction.

For voice tube models:
Rotate the voice tube in the opposite direction.

For Over-the-Ear configurations:
3.4 Position the earloop on opposite
side of headset receiver to fit on left ear.
3.5 Form a small loop in the cable for
positioning

flexibility then snap the cable

For Over-the-Head configurations:
3.6 Rotate the pivot pin holder as shown.
3.7 Form a small loop in the cable for
positioning

flexibility then snap the

cable into the cable

For Behind-the-Head configurations:
3.8 Pull off the removable tip from
the left side and push it into right side.
3.9 Push the pivot pin into the pivot pin
holder .
3.10 Form a small loop in the cable for
positioning

flexibility, snap the cable into the

4.2

Use these steps to get set up quickly:

See Maintenance and Troubleshooting section on the other side.

3.7

3.5

Behind-the-Head

Headset

for right ear use

3.10

3.8

3.9

3.10

Pivot Pin Holder

Behind-the-Head
Configuration

4.6

Cable Retainers

4.6

to apply pressure when
changing configurations.

H151 Final 9/19/02 9:32 AM Page 2