Amana aew3530ddw Betriebsanweisung

Troubleshooting

• The pans being used may not be of the size or material recommended for best

results.

• There may not be sufficient room around sides of the pans for proper air circulation

in the oven.

• Check instructions for preheating, rack position and oven temperature.

• Oven thermostat calibration may differ between old and new ovens. Follow recipe

and use the directions in this guide before calling for service since the calibration on
the previous oven may have drifted to a too high or too low setting. (See page 12 -
Adjusting the Oven Temperature.)

• This is the cooling fan and is normal. The fan will continue to run after use

until the oven cools.

• This is normal. The fan will automatically shut off when the oven is cooled.

• BAKE or LOCK may flash rapidly in the display to alert you if there is an error

or a problem.  If BAKE or LOCK appear in the display, press the CANCEL pad.
If BAKE or LOCK continue to flash, disconnect power to the appliance.
Wait a few minutes, and then reconnect power. If the flashing still continues,
disconnect power to the appliance and call an authorized servicer.

• If the oven is heavily soiled, excessive flareups may result in a fault code during

cleaning. Press the CANCEL pad and allow the oven to cool completely, wipe out
excess soil, then reset the clean cycle. If the fault code reappears, contact an
authorized servicer.

• Oven may be in Sabbath Mode. (See page 11.)

• The oven makes several low level noises. You may hear the oven cooling fan going

on and off. You may also hear the oven relays as they go on and off. These are all
normal.

• As the oven heats and cools, you may hear sounds of metal parts expanding and

contracting. This is normal and will not damage your appliance.

• Oven is in Sabbath Mode. To cancel, press and hold the Clock pad for five

seconds.