EnGenius EOC-3220 Benutzerhandbuch

11g Wireless Outdoor Client Bridge/AP  

 

 

 

 

          Version 1.36 

 

 

 23 

 

 

 
 
ƒ  Network Type: Select  Infrastructure or Adhoc from the drop-down list. 

Infrastructure is a point-to-multipoint (PtMp) topology where as Adhoc is a point-to-
point topology (PtP). 

ƒ  SSID: The SSID is a unique named shared amongst all the points of the wireless 

network. The SSID must be identical on all points of the wireless network and cannot 
exceed 32 characters. Enter the MAC address of AP Radio IF for Desired BSSID. 

ƒ  Channel: Select a channel from the drop-down list. The channels available are 

based on the country’s regulation. When selecting Infrastructure mode, a channel is 
not required, however, when selecting Adhoc mode, you must select the same 
channel on all points.  

ƒ  Enable MAC cloning:  Change the Bridge’s MAC to the connected Client’s MAC 

which is the first client connects with Bridge. This function only allow one Client 
connect to network. 

ƒ  Clone MAC Address: Bridge’s MAC will be defined by the value in blank space. 
ƒ Click 

on 

the 

Apply Changes button to confirm the changes. This device will 

automatically restart once these changes have been applied.  

 

ƒ  Click on the Advanced Settings link under the Wireless menu. On this page you 

can configure the advanced settings to tweak the performance of your wireless 
network. Options available are: fragmentation threshold, RTS threshold, beacon 
interval, output power, preamble type, and 802.11g protection.