Cisco S280UAISK9-12311T Benutzerhandbuch
1
Installing Cisco Business Communications Solution Verified Designs
Introduction
This guide describes installing Cisco Business Communications Solution Verified Designs
(BCS Verified Designs) using Cisco IP Communications (IPC) Express Quick Configuration Tool
(QCT).
(BCS Verified Designs) using Cisco IP Communications (IPC) Express Quick Configuration Tool
(QCT).
QCT is a GUI application provided for Cisco partners and resellers. You can use QCT to configure all
Cisco CallManager Express (CME) supported platforms to enable the simple configuration of a basic
telephony system that is typically less than 50 IP phones. In addition, QCT recognizes any Advanced
Integrated Module (AIM) or network modules with Cisco Unity Express (CUE), thus providing
voice-mail and Auto Attendant (AA) capability to the Cisco CME system.
Cisco CallManager Express (CME) supported platforms to enable the simple configuration of a basic
telephony system that is typically less than 50 IP phones. In addition, QCT recognizes any Advanced
Integrated Module (AIM) or network modules with Cisco Unity Express (CUE), thus providing
voice-mail and Auto Attendant (AA) capability to the Cisco CME system.
QCT generates a complete telephony configuration file, which can be automatically downloaded to the
Cisco router that support Cisco CME and Cisco CUE.
Cisco router that support Cisco CME and Cisco CUE.
This guide also includes procedures for continuing the installation of Cisco BCS Verified Designs using
the Cisco command-line interface (CLI).
the Cisco command-line interface (CLI).
Finally, this guide includes a procedure for adding security to the voice network using Cisco Security
Device Manager.
Device Manager.
Contents
This chapter contains the following sections:
•
•
•
•
•