Maytag MFC2061KES Betriebsanweisung
30
Ice maker is not
producing ice
Temp Alarm Light
is flashing
is flashing
All lights on
dispenser and
interior lights are
off and appliance
is still running
dispenser and
interior lights are
off and appliance
is still running
Door alarm set, no
alarm sounded
alarm sounded
Temperatures in
display look too low
display look too low
PROBLEM
POSSIBLE CAUSES
Ice maker arm is on OFF position.
Household water supply is not reaching
water valve.
water valve.
Copper tubing has kinks.
Water pressure is too low.
Check freezer temperature.
Exceeded normal operating
temperatures.
temperatures.
Control has been set to Sabbath Mode.
Alarm mode has been disabled.
Temperature display has been set to
Celsius rather than Fahrenheit.
Celsius rather than Fahrenheit.
Confirm ice maker arm is down. See Automatic Ice
Maker, page 16.
Maker, page 16.
See Connecting the Water Supply page 8.
Turn off water supply and remove kinks. If kinks
cannot be removed, replace tubing.
cannot be removed, replace tubing.
Water pressure must be between 35 to 100 pounds
per square inch to function properly. A minimum
pressure of 35 pounds per square inch is
recommended for refigerators with water filters.
per square inch to function properly. A minimum
pressure of 35 pounds per square inch is
recommended for refigerators with water filters.
See Temperature Controls, pages 10-12. Freezer
temperature should be between 0° to 2° F (-18° to
-17° C) to produce ice.
temperature should be between 0° to 2° F (-18° to
-17° C) to produce ice.
See Temp Alarm, pages 11-12.
See, Sabbath Mode, page 12.
To activate audible alarms, refer to pages 11-12.
See Temperature display on page 11.
WHAT TO DO
Troubleshooting