Brother HL-5270DN Netzwerkanleitungen
Control panel setup
8 - 10
8
■
PASSWORD
If you have selected LEAP for an authentication mode, you will need to enter a password that is 32
characters or less in length.
characters or less in length.
■
APPLY
In order to make your wireless settings effective, you must select the APPLY option from the WIRELESS
sub menu and then select YES or YES&REPORT. If you do not do this, the network settings will not be used
unless you switch the printer off and then on again.
sub menu and then select YES or YES&REPORT. If you do not do this, the network settings will not be used
unless you switch the printer off and then on again.
NETBIOS/IP
You can enable and disable the NetBIOS facility to obtain the IP address.
SET DEFAULT
You can restore the WLAN menu settings to factory default.