Brother MFC-P2000 Anleitung Für Quick Setup

- 15 -

Type 

C:\RPCX>STMX

 and press the 

 key to make the Machine Status Monitor

Program stay resident in your computer memory. If there are any changes to the machine
status, it displays a message on your computer screen.

If the machine status monitor program stays resident in your computer, you can monitor the
machine status on your computer screen immediately using the hot-key sequence
(

+

+

).

To remove the Machine Status Monitor program from your computer memory, type

C:\RPCX>STMX/R

 and press the 

 key.

❏ The RPC works in the environment where your machine is directly connected to your

computer. If you are using any printer buffer switches which do not support bi-directional
communication between the machine and computer, the program works only in the PC to
machine direction and cannot receive machine status information.

❏ The program does not work with printers on a network.

❏ If the RPC conflicts with some application software, exit your application software and

then run the RPC.

❏ The RPC may work in the DOS-compatible box screen mode of Windows, however, it is

recommended that you completely exit from Windows to the DOS prompt before using the
RPC.

❏ The Machine Status Monitor and some other Terminate-and-Stay programs cannot coexist

in the computer’s memory. If they do not work properly together, use them one at a time.
You can suspend the Machine Status monitor with any of the following methods or
commands.

 Type 

C:\RPCX>STMX/R

 and press the 

 key.

 Hold the space bar down while executing the 

AUTOEXEC.BAT

 file at DOS startup to

prevent the status monitor being loaded as a TSR program.