Delorme pn-40 Betriebsanweisung

Seite von 97
68
The Device Setup Page
To open the Device Setup Page, press MENU, highlight Device Setup, and press ENTER.
Use the Device Setup Page options to modify the default settings on the Earthmate PN-40, such as 
the battery type, backlight settings, and more. Use the arrow keypad to highlight options.
Modifying the Device Preferences
To Modify the System Settings
To update GPS settings, WAAS status, battery type, and/or USB power setting, from the Device 
Setup Page, highlight the System option and press ENTER. Press QUIT at any time to return to the 
Device Setup Page.
•  To update the GPS settings, highlight the GPS Setting drop-down list and press ENTER.  
 
Highlight NormalPower Saving, or Disable GPS and press ENTER.
•  To update the WAAS status, highlight the WAAS drop-down list and press ENTER. Select the  
 
Enabled option to enable WAAS use or select the Disabled option to disable WAAS use.  
 
Then, press ENTER.
 
Note: In most cases, a WAAS signal provides greater accuracy than a non-WAAS signal.
•  To update the battery type, highlight the Battery Type drop-down list and press ENTER.  
 
Select the battery type you are using and then press ENTER.
•  To update the USB power setting, highlight the USB Power drop-down list and press ENTER.  
 
Select the Enabled option to enable power from the USB port or select the Disabled option to  
 
disable USB power.
•  To restore the default page settings, highlight Restore Defaults and press ENTER.
To Modify the Display Settings
To update the device’s color scheme, backlight intensity, and/or backlight timer, from the Device 
Setup Page, highlight the Display option and press ENTER. Press QUIT at any time to return to the  
Device Setup Page.
•  To modify the color scheme, highlight the Color Scheme drop-down list and press ENTER.  
  Highlight the color scheme you want and press ENTER.
•  Spring (green)
Display menu options
Device Setup menu