IQinVision iqd30sv-f1 Installationsanweisungen
6
5. Mounting Options
The IQeye Mini Dome is designed to be used in one of the following
configurations:
configurations:
1. Surface mounted to any interior durable surface wall.
2. Surface mounted to a plenum or other durable ceiling surface.
3. Mounted to the IQeye Mini Single-Gang Box Wall Mount Adapter (P/N
IQD4-WB or IQD4-WG). (For use with Standard Camera Model only.)
4. Used in conjunction with a ¾” NPT threaded pipe (not included) as
part of a pendant mount solution with the use of the IQeye Mini Dome
Pendant Mount Adapter Multi-Pack (P/N IQD4-PB or IQD4-PG). (For
use with Standard Camera Model only.)
Pendant Mount Adapter Multi-Pack (P/N IQD4-PB or IQD4-PG). (For
use with Standard Camera Model only.)
Note: The first section of this guide covers installation of an IQeye Mini
Dome without the optional mounting adapters. The subsequent sections
briefly discuss how to mount the dome camera with the optional adapters.
Dome without the optional mounting adapters. The subsequent sections
briefly discuss how to mount the dome camera with the optional adapters.
6. Mounting on to an Interior
Durable Surface Wall
1. Remove the trim cover
Standard Camera Model: remove the camera trim cover by pressing the
mounting clips on both sides with the supplied trim cover removal tool. Then
pivot the trim cover up and away from the camera base as shown in Image 6.1.
Standard Camera Model: remove the camera trim cover by pressing the
mounting clips on both sides with the supplied trim cover removal tool. Then
pivot the trim cover up and away from the camera base as shown in Image 6.1.
Side 1
Side 2
Cover Removal
Image 6.1