OKI c5150n Verweisanleitung

Seite von 47
42
Error Messages
Some of the more common error 
messages appear below. For additional 
error messages, see “Error Messages” 
under “Troubleshooting” in your 
on-line User’s Guide.
XXX TONER SENSOR ERROR
Appears on the second line of the 
display to indicate that the lever for 
the toner cartridge color indicated is 
not pushed all the way back.
What to Do
Open the cover. Push the lock lever 
toward the back of the printer as far as 
it will go. Close the cover. If this does 
not clear the message, call your local 
service dealer.
XXX TONER LOW
Appears on the second line of the 
display to indicate that color 
XXX
 
toner cartridge is getting low.
Note
: If you have changed the LOW 
TONER item in the SYSTEM 
CONFIG MENU to STOP, the 
ATTENTION light will blink and you 
must either replace the toner cartridge 
immediately or press the ON LINE 
button to continue printing.
What to Do
Be sure you have a replacement toner 
cartridge (see page 3) on hand.
INSTALL NEW TONER
nnn: XXXX TONER EMPTY
The toner cartridge indicated (
XXX
has run out of toner.
What to Do
Replace the toner cartridge.
XXXX DRUM NEAR LIFE
Appears on the second line of the 
display to indicate that color 
XXXX
 
(e.g, 
BLACK
) image drum needs to be 
replaced.
What to Do
Replace the 
XXXX
 image drum. (See 
the instructions supplied with the new 
image drum.)
INSTALL ADDITIONAL MEMORY
420: MEMORY OVERFLOW
The amount of data in the file being 
printed has exceeded the printer’s 
memory.
What to Do
• Reduce the size of the file being 
printed (e.g., print the file as separate 
groups of pages instead of all the 
pages at one time).
• Install additional memory in the 
printer (see your on-line User’s Guide 
for more information).