OKI ML520 Betriebsanweisung

Your OKI printer has been carefully designed to give
you years of safe, reliable performance. As with all
electrical equipment, there are a few basic precautions
you should take to avoid hurting yourself or damaging
the printer:

• Read the setup and operating instructions in this

manual carefully. Be sure to save it for future
reference.

• Read and follow all warning and instruction labels on

the printer itself.

• Unplug the printer before you clean it. Use only a

damp cloth; do not use liquid or aerosol cleaners.

• Place your printer on a firm, solid surface. If you put

in on something unsteady, it might fall and be
damaged; if you place it on a soft surface, such as a
rug, sofa, or bed, the vents may be blocked, causing
it to overheat.

• To protect your printer from overheating, make sure

no openings on the printer are blocked. Do not put
the printer on or near a heat source, such as a radiator
or heat register. If you put the printer in any kind of
enclosure, make sure it is well ventilated.

• The printhead can get quite hot when it has been

printing for a length of time. Do not touch the
printhead until it has had a chance to cool off.

• Do not use your printer near water, or spill liquid of

any kind into it.

• Be certain that your power source matches the rating

listed on the back of the printer. If you are not sure,
check with your dealer or with your local power
company.

• Your printer has a grounded, 3-prong plug as a safety

feature, and it will only fit into a grounded outlet. If
you can not plug it in, chances are that you have an
older, non-grounded outlet; have an electrician
replace it with a grounded outlet. Do not use an
adapter to defeat the grounding.

• The printer must be installed near a power outlet

which remains easily accessible.

• To avoid damaging the power cord, do not put

anything on it or place it where it will be walked on.
If the cord becomes damaged or frayed, replace it
immediately.