Liebherr hc 1001 Verweisanleitung

Fully Integrated

HC 1001/HC 1050 - SBS 20H0,  HC 1011/HC 1060 - SBS 

20H1,  HF 851/HRB 1110 - SBS 19H0

Designing the Kitchen Cabinet Doors

You will need two doors for the kitchen cabinet, one for the re-
frigerator compartment, and one for the freezer compartment. 
In general, the doors have these characteristics:

•  The width of the cabinet doors depends on the kitchen style

and the size of the gaps between the door panels of the 
cabinetry. Generally, a 1/8” vertical gap between the cabinet 
doors is recommended.

•  The doors should be at least 5/8 in. (16 mm) thick to allow

the connecting rails to be fastened to them. The maximum 
thickness of the door panel can be 3/4 in. (19mm).

•  With both doors closed, there should be a minimum of 1/8

in. (3 mm) between the upper and lower doors (2). Also, there 
should be a 1/8 in. (3 mm) clearance between the upper door 
and the cabinet door(1) above it (if any).

•  The top edge of the upper door (1) and lower door (2) should

be even with the doors of adjoining cabinet(s), if any.

•  Adjust the door alignment before installing the appliance. It is

impossible to adjust the door with the appliance installed.

•  Check the installation dimensions according to Section "Unit

Dimensions".

•

Do not load the door of the refrigerator with more than 49,6 
lbs (22,5kg) of food.

•  Before assembling the unit door, make sure that the permit-

ted weight for the unit doors is not exceeded. Otherwise 
damage to the hinges and malfunctions arising from this  
cannot be ruled out.

   

 

 

       

Kitchen Cabinet Doors

15

Maximum weight of unit door

Fridge door

Freezer door

39.6 lbs (18 kg)

44 lbs (20 kg)