Netcomm HS960 Zusätzliches Handbuch

 
The following process outlines how to perform a HS960 firmware upgrade. 
 
1.  Connect a Windows XP based computer via Ethernet directly to one of the 

LAN ports on the back of the HS960. 

 

2.  Double check that the TCP/IP protocol settings for the network card on the 

Windows XP computer are set to ‘Obtain an IP address automatically’ i.e 
DHCP client. 

 

3.  If you haven’t already power on both the computer and HS960. 

 

4.  Disable any software based firewalling, should it be running on the computer. 

 

5.  Access the HS960s web-based interface by launching the Internet Explorer 

web-browser and opening the address 

 

 

 

6.  When prompted type in “admin”’ / “admin”’ respectively for the username / 

password followed by selecting the ‘Login’ button.  

 

 

 

7.  From the HS960s web based interface select ‘System Tools’ -> ‘Firmware’ 

then the ‘Browse’ button.  

 

 

 

8.  Locate and select the ‘HS960V1.01.01.bin’ firmware upgrade file then 

select the ‘Apply’ button to initiate the firmware upgrade. 

Page 1 of 2