Netcomm np3680 Betriebsanweisung

Chapter15  Upgrade Firmware

This chapter describes the three methods available to upgrade the MFP Server firmware. Please follow one 
of the following Procedures: 

Procedure A: Using the Control Center

1.   Open Control Center. It will automatically search the existing Servers and display their statuses. 

2.   Select the Server that you want to upgrade the firmware. Double click the selected Server and enter 

Administrator (default: 

admin) and Password (default: admin). 

3.   Select the 

Maintenance button. 

4.   Click 

Open to find your new firmware file and click Upgrade to start upgrading the firmware. 

5.   Wait for 15 seconds for system reboot.

Procedure B: Using the Server’s Web Pages

1.   Power on the Server. Suppose that the Server is in DHCP mode. 

2.   Check the Server’s IP address. 

3.   First, run Control Center. It will automatically search for Servers on the LAN. Then Servers’ IP addresses 

will be shown in Control Center. 

4.   Run any Web browser, like Microsoft Internet Explorer. Go to “http://Server’s IP address “or “http://

Server’s Host Name” to access the Server’s home page. 

5.   Click 

CONFIG at the top of the menu. 

6.   Login the Server with Administrator (default: 

admin) and Password (default: admin). 

7.   Click 

Maintenance. 

8.   Click 

Upgrade Firmware.

9.   Click 

Browse button to choose the file of new firmware. 

10.  Click 

Upload button to start firmware upgrade. 

11.  Wait for 15 seconds for system reboot.

Procedure C: Using the Init Button and the TFTP Client

1.   Plug in the power adaptor while pressing the Init button until LED indicators of Power, USB1 and USB2 

blink. Please note that after that, the Server will operate using the factory default values after restarting, 
i.e., your Server’s configuration will recover to Factory Default values. 

2.   Start the TFTP client Tool: Image Burner

3.   Enter the Server’s Fallback IP address:  192.168.1.100 and click 

Open Image to open your new