Runco SP-42 Betriebsanweisung
6
Runco CinemaWall SP Series Owner’s Operating Manual
PRE
L
IMINAR
Y
1.
DISPLAY STAND
Optional accessory for tabletop installations.
2.
REMOTE CONTROL SENSOR
Receives the signals from the remote control.
3.
AMBIENT LIGHT SENSOR (SP-42 and SP-50 only)
This sensor measures the light level in the viewing area; it is active when the Energy
Mode is set to Auto (refer to Energy Mode on page 41 for more information).
Mode is set to Auto (refer to Energy Mode on page 41 for more information).
4.
STANDBY/ON INDICATOR
- Lights green to indicate normal operation;
- Flashes green (once per second) when the AUTO OFF feature is active.
- Lights red to indicate that the CinemaWall is in standby mode;
- Flashes green or red (twice per second) to indicate an error condition.
5.
HANDLES
ALWAYS use the handles when carrying the unit.
6.
STANDBY/ON BUTTON (
)
Press to put the display into operation or standby mode.
7.
MENU
Press this button to show or hide the On-Screen Display (OSD) controls.
8.
INFO/SET
When the OSD controls are visible on-screen, press this button to select an OSD
sub-menu or confirm a changed setting.
sub-menu or confirm a changed setting.
When no OSD appears on-screen, press this button to display the currently-selected
input, aspect ratio and input signal characteristics (resolution, timing etc.).
9.
INPUT/UP (
)
Press this button to switch inputs or move the cursor up in the current OSD menu.
10. ASPECT RATIO/DOWN (
)
Press this button to change the aspect ratio (screen size) or move the cursor down in
the current OSD menu.
the current OSD menu.
11. LEFT (
) / VOL – and RIGHT (
) / VOL +
These decrease or increase the volume of sound from the speakers, or move the
cursor left or right in the OSD mode.
cursor left or right in the OSD mode.