Runco rs 440lt Betriebsanweisung
44
Runco RS-440 Installation/Operation Manual
PRE
L
IMINAR
Y
To change the aspect ratio (size and shape) of the projected image, select Aspect Ratio
from the Main Menu and press ENTER. Select the appropriate aspect ratio for your
screen size and the type of program material being viewed, then press ENTER; refer to
Table 4-1.
from the Main Menu and press ENTER. Select the appropriate aspect ratio for your
screen size and the type of program material being viewed, then press ENTER; refer to
Table 4-1.
➨
➤
Table 4-1. Aspect Ratio Settings
Aspect
Ratio
Setting
Description
Aspect
Ratio of
Source
Signal
Geometry of Projected Image
Standard RS-440 or RS-440LT
(1.78:1 Screen)
RS-440LT/CineWide (2.35:1 Screen)
16:9
16:9 linearly scales the
source active image
horizontally and vertically
to fill the 16:9 rectangle
of the designated image
area.
source active image
horizontally and vertically
to fill the 16:9 rectangle
of the designated image
area.
16:9
4:3
4:3
4:3 linearly scales the
source active image
horizontally and vertically
to fill a 4:3 rectangle
which is centered and
the same height as the
16:9 designated image
area. The remaining area
is black.
source active image
horizontally and vertically
to fill a 4:3 rectangle
which is centered and
the same height as the
16:9 designated image
area. The remaining area
is black.
16:9
4:3