Runco rs 440lt Betriebsanweisung
Runco RS-440 Installation/Operation Manual
53
PRE
L
IMINAR
Y
Save Settings: To store changes to picture quality settings for the current input and
resolution in the “Custom,” “ISF Day” or “ISF Night” Picture Memory, choose Save
Settings from the Picture Adjust menu and select “Custom,” “ISF Day” or “ISF Night.” To
recall this preset at a later time, select it from the Picture Memory menu (see above) or
press the corresponding button on the remote control (see Figure 2-3).
resolution in the “Custom,” “ISF Day” or “ISF Night” Picture Memory, choose Save
Settings from the Picture Adjust menu and select “Custom,” “ISF Day” or “ISF Night.” To
recall this preset at a later time, select it from the Picture Memory menu (see above) or
press the corresponding button on the remote control (see Figure 2-3).
For more information about this command, refer to Save Settings on page 43.
Blue Image: This feature, when enabled, removes all red and green color information
from the image (simulating a blue filter), and is useful for color-calibrating the projector or
other video components.
from the image (simulating a blue filter), and is useful for color-calibrating the projector or
other video components.
Splash Screen Timer: This timer controls how long the start-up (ISF and Runco logo)
image stays on-screen after you turn on the projector. The choices are 0, 5, 15 or 60
seconds. To disable the splash screen, set the Splash Screen Timer to 0.
image stays on-screen after you turn on the projector. The choices are 0, 5, 15 or 60
seconds. To disable the splash screen, set the Splash Screen Timer to 0.