Garmin eTrex Betriebsanweisung

M

aIn

 M

enu

1. Select a waypoint on the Waypoint page >

ENTER.

2. Select

PROJECT > ENTER. A numeric name is

assigned to the new waypoint.

3. Distance is selected by default. Press

ENTER.

4. With the Edit Number page open, press

DOWN

to move the highlight to the next number in the

field. With the preferred digit selected > 

ENTER

to activate the drop down number list.

5. Select the correct number >

ENTER. When all

numbers are entered, highlight

OK > ENTER.

6. With the Project Waypoint page open, press

DOWN to highlight the bearing field > ENTER

to view the Edit Angle page.

7. Press

DOWN to move the highlight to the next

number in the field.  With the preferred digit 

selected, press

ENTER to activate the drop

down number list.

8. Select the correct number >

ENTER. When all

numbers are entered correctly, highlight

OK >

ENTER.

9. The name, symbol, and elevation can be

changed on this page as well. When all

changes have been made, select

OK >

ENTER to save the waypoint. Select GOTO to

save the waypoint and begin direct navigation

to the point.

Navigate using one of three methods: GOTO 

TracBack, and Routes.
The Routes feature guides you from the first waypoint 

in the route to each successive waypoint to your final 

destination.
The Routes feature and the GOTO feature both guide 

you to destination waypoints. However, the Routes 

feature is more useful for navigating to multiple 

points along a path. When you reach one waypoint, 

you are directed to the next waypoint on the route. 
To create a route, select waypoints from the waypoint 

list and place them into a route in the sequence that 

you want to navigate to them. You need at least two 

waypoints (up to a maximum of 125) linked together