Garmin 640 Betriebsanweisung
4
GPSMAP 640 Owner’s Manual
Marine Mode: Advanced Configuration
Waypoint and tracks—provides access to waypoint and track
information shortcuts, as on the Navigation chart. See
Note: The tracks Display configuration option is not available
on the Mariner’s Eye screen. You need a BlueChart g2 Vision SD
card to use this feature.
other Vessels—provides access to AIS and DSC shortcuts, as well
as chart-specific AIS display settings, as on the Navigation chart.
Weather radar—toggle the NEXRAD weather overlay on or off.
This option is only available when connected to a Garmin GXM
40 XM antenna device. See
for more information on
interpreting weather features.
Data Bars—control how charting numbers appear on the screen, as
Data Bars—control how charting numbers appear on the screen, as
on the Navigation chart. See
Chart appearance—allows customization of the appearance of
the Mariner’s Eye or Mariner’s Eye 3D screen.
Color Scheme—(Mariner’s Eye 3D only) allows the setting of
the colors used to indicate depth hazards.
Normal—show the land as seen from the water.
•
◦
Water Hazard—indicate shallow water and land with a
color scale. Blue indicates deep water, yellow indicates
shallow water, and red indicates very shallow water. Green
and brown indicate land.
all Hazard—show land as dark red.
all Hazard—show land as dark red.
range rings—toggle the range rings on or off.
Safe Depth—(Mariner’s Eye 3D only) adjust the depth at which
Safe Depth—(Mariner’s Eye 3D only) adjust the depth at which
red indicates shallow water.
Lane Width—adjust the width of the course line drawn when
Lane Width—adjust the width of the course line drawn when
navigating. This setting affects direct navigation (Go To) and routes
(Route To), but does not affect automatic guidance (Guide To).
Fish Eye 3D Settings
From the Fish Eye 3D screen, touch
Menu
.
View—change the viewpoint. Choose the direction you want the
camera to point. For example, if you touch
port
, the view places
the camera to starboard, looking across the boat to port.
tracks—toggle tracks on or off.
Data Bars—control how charting numbers appear on the screen, as
tracks—toggle tracks on or off.
Data Bars—control how charting numbers appear on the screen, as
on the Navigation chart. See
◦
◦